1.2713 mold steel Product Description 

 Product Name: hot work mold alloy tool steel ----- 1.2713 
 Description: 
 Germany Sa 
 Hot mold alloy tool steel ----- 1.2713 

 Introduction: 1.2713 (EN ISO 4957) ω /% 
 Chemical composition: 
 C Si Cr Mn Mo V Vanadium W Tungsten Ni P P S sulfur 
 0.50-0.60 ≤ 0.40 0.80-1.20 0.60-0.90 0.35-0.55 1.50-1.80 0.030 0.030 





 Performance and application: 
 Low content of alloying elements, hot work die steel with good toughness, strength and wear resistance, molybdenum steel friends, is not sensitive to temper brittleness, the steel hardenability. 
 Purposes: 
 Used to manufacture various types of large and medium-sized forging die. 




 Main have the following products: 
 Sweden wins one hundred within the ASSAB: 
 S136, S136H, 166,168,8402,8407,635,635 H, S7, 618,618 HH, 718,718 H, DF-2, DF-3, XW-5, XW-160, XW-41, XW-42, HSP-41, KM2 , V-4, V-10, ASP-23, ASP-30, ASP-60, ELMAX, 4140 (high tensile steel). 
 (2) Austria the Bluff BOHLER: 
 K110, K100, K107, K340, M238, M300, M310, M340, M201, M202, W302, W321, K460, S390PM, S590PM, S690PM 
 3. Germany Sa SAARSTAHL,: 
 GS-1.2711, GS-1.2738H, 738, GS-2688, GS-1.2316, GS-1.2316H, GS-1.2083, GS-1.2344EFS, GS-1.2344ESR, GS-1.2311, GS-1.2312, GS-1.2379, GS-1.2510, GS-1.2767. 
 (4) Hitachi, Japan: 
 SGT, SKS3, SKD11, SLD, SLD8, HPM7, HPM50, HPM38, DAC, FDAC, DAC55, SKD61. 
 Japan Datong DAIDO: 
 GOA, DC11, DC53, PDS5, PX88, YK30, NAK55, NAK80, PAK90, SKH9.DH2F, S-STAR (A). 
 6. Mold steel 
 P20, 420, L6, H13, A2, D2, H13, O1, S1, S7, O2, M35, M42, 3115,5120,4130. 
 7 domestic steel mold 
 S136, S136H, the NAK-80, the T10, T15, 45 #, Ace Steel, of Cr12, Cr12Mov, D2, P20, H13, 718,718 H-A3.